 |
 |
At times flowability of certain powders is so poor that discharge from silos assisted by flow aids such as aeration pads, pneumatic hammers, hammer blasts, or even air cannons is impossible. In such cases a Bin Activator is the ultimate flow aid and extracting device for such materials. |
|
 |
 |
 |
 |
Beskrivelse |
 |
 |
 |
 |
 |
The BAS Bin Activator is a device of half convex, half conical shape. Due to vibration it facilitates material flow from hoppers or silos. It consists of a seamless carbon or stainless steel cone, manufactured on a sheet metal lathe, a seamless SINT® engineering polymer seal with integrated upper and lower flange, suspensions for connection of the Bin Activator with the silo, as well as one or two electric vibrators. |
|
 |
 |
 |
 |
Funktion |
 |
 |
 |
 |
 |
To fit the BAS Bin Activator, the silo cone has to be shorter than usual, leaving a wide outlet section. A flange supplied before or together with the Bin Activator is welded on the silo outlet on site. Special suspensions and a seamless flanged SINT® engineering polymer seal form a flexible connection between silo and Bin Activator. One or two electric vibrators fitted to the unit generate vibration of the Bin Activator every time the feeding device beneath the silo is started for material extraction. During operation the Bin Activator describes a gyratory movement which is transmitted to the material inside the silo. The result is smooth material flow through the Bin Activator outlet into the connected feeder. The BAS Bin Activator is specialised for certain applications, especially in the flour milling industry, to facilitate discharging of powdery or granular materials from silos or hoppers. The use of this equipment ensures optimum feeding of the material causing “mass flow” inside the silo and avoiding bridging or rat holing phenomena. |
|
 |
 |
 |
 |
Ydelse & Tekniske detaljer - Fordele |
 |
 |
 |
 |
 |
- Range: from Ø 600mm (23 in) to 2,100mm (7 ft)
- Construction material: carbon steel, 304L / 316L stainless steel
- Robust, compact design
- Range of seals including FDA-approved food-grade version and high-temperature version
- Wide range of baffle plates in accordance with application
- Low power requirement
- Extra-durable suspensions and seal
- 70% less welds than in traditional bin activators
- Seamless heavy-duty activator cone
|
|
 |
 |
 |
 |
Optioner & Tilbehør |
 |
 |
 |
 |
 |
- Suspensions suitable for installation on aluminium silos
- Vast range of electric vibrators (see OLI® vibrators)
- Additional fluidisation/aeration system
- Outlet spouts with emergency slide gate
- Negative pressure version available
ATEX ZONE 22 VERSION AVAILABLE.
|
|
 |
 |
 |
Teknisk manual |
|
 |
 |
|
|
 |
 |
Brochure |
|
 |
 |
 |
 |
 |
Brochure ikke til rådighed i øjeblikket |
|
 |
| Udskriv |
 |
 |