 |
|
|
|
Description |
|
|
|
|
|
The WASTEMASTER® TSB-1 Mechanical Effluent Pre-treatment Plant carries out up two different processes: separation of solids present in effluents and the compaction and de-watering of the extracted solids. |
|
|
|
|
|
Function |
|
|
|
|
|
The sewage from cesspool tanks / interceptors or industrial plants collected by special tankers, has to be pre-treated before it can be introduced into any kind of purification system.
The suspended solids are retained by the screen increasing the level in the front part of the screen. At this point the screw starts operating, cleaning the screen by means of brushes fixed on the outer part of the screw flight, removing the material, and then de-watering and compacting it.
The machine consists of the following parts:
Screen;
Conveyor screw;
Compactor.
The conveyor screw consists of a shaftless spiral which collects the solids from the bottom of the screen conveying them without risk of clogging.
The compactor positioned in the upper part, equipped with a washing section for diminishing organic fractions, uses the conveyor screw for compaction and de-watering of the screenings. |
|
|
|
|
|
Performance & Technical Features - Benefits |
|
|
|
|
|
- Flow rates up to 30 litres per second (64 cfm)
- Perforated screen basket in various mesh sizes up to 10 mm
- Up to 40% volume reduction of solids
- Tank washing system included in standard version
- Splash-free
- Odour-free
- No mechanical parts in contact with waste water or solids to be handled
- No civil works required
- Low installation cost
- Easy to set up
- Low maintenance and operation costs
- Small footprint
- Low volume of solids for disposal
|
|
|
|
|
|
Options & Accessories |
|
|
|
|
|
- Bag attachment
- Endless tube
- Drive guard
- Tube washing
- Discharge module heating insulation
|
|
|
|
|
Technical Catalogue |
|
|
|
|
|
|
|
|
|
|
|
Brochure |
|
|
|
|
|
|
| Print |
|
|
