 |
|
|
|
Description |
|
|
|
|
|
Vibrating Bin Aerator types VB, VBE, VBI and VBM combine product aeration under operating pressure reaching 6 bar (87 PSI) with an additional slight vibration on the silo wall (see data sheet for sizing, positioning and number of aerators). Due to its design damage of the silo is impossible even with abrasive materials. An additional backstop valve is not required as, due to the work pressure of 2 to 6 bar (29-87 PSI), no material can enter the zone beneath the elastic FDA-approved silicon lip. OLI® Vibrating Bin Aerators are used for the improvement of mass flow with powders and granular materials. Due to FDA-conformity of the membrane material the Aerators are suitable for food-grade applications. To meet the most demanding user requirements a stainless steel shaft version (VDI) is available. |
|
|
|
|
|
Function |
|
|
|
|
|
Compressed air is introduced into the stored material through the silicon lip which adheres to the inside silo wall. By varying the work pressure within a range between 2 and 6 bar (29 to 87 PSI) the intensity of vibration of the elastic silicon lip can be changed. Due to interval operation and a maximum operation time of five seconds air consumption is very low. |
|
|
|
|
|
Performance & Technical Features - Benefits |
|
|
|
|
|
- Sturdy design
- Self-cleaning
- Abrasion-resistant
- Easy to install (VBE version for external mounting)
- VBM micro-version available
- Air pressure 2 to 6 bar (29 to 87 PSI)
- Ambient temperature -40° C to 170° C (-40° F to 340° F) for VB and VBI; -40° C to 80° C (-40° F to 176° F) for VBM
- For powders and granular products
|
|
|
|
|
|
Options & Accessories |
|
|
|
|
|
- With stainless steel shaft (VBI)
- For external assembly (VBE only)
- Miniature execution (VBM)
|
|
|
|
|
Technical Catalogue |
|
|
|
|
|
|
|
Brochure |
|
|
|
|
|
|
| Print |
|
|
